1. The gas release valve is another new type of equipment developed by our company. It is suitable for the gas release equipment dedicated to the blast furnace gas release tower project of the steel-making enterprise to ensure that the valve is turned off within the set pressure range, and the gas is not allowed to be released. A safety device that can release the gas safely when the set pressure is exceeded. 2, the structure of the use of hemispherical (weight type) valve, that is, the use of the valve (weight) of their own weight, through the lever balance mechanism to open and close. When the lower part of the valve seat gas pressure to reach the set value (dangerous value), can overcome the weight of the valve, and automatically open, to achieve the purpose of safe release of gas. DN50 ~ DN1200
The pneumatic hoist is designed according to the relevant principles of pneumatic conveying and is specially designed for supporting the slag treatment system. Most of the slag treated by the slag treatment system is transported away by the belt conveyor after granulation and dehydration. The equipment return water entering the sedimentation tank still contains a certain amount of fine slag. In order to prevent the fine slag from being difficult to clean up on the bottom plate of the tank, a pneumatic hoist is selected to re-lift part of the slag-water mixture at the bottom of the sedimentation tank into the dehydrator for secondary dehydration. The reasonable process parameter matching and the sedimentation tank with the conical structure of the harvest ensure its good slag return effect. The product has simple structure, easy maintenance and replacement; no mechanical moving parts, simple operation, low operating cost; good slag return effect.
The disc feeder has a simple structure. The disc rotates to transfer the materials from the material port to the disc. The disc rotates to transfer the materials from the material port to the conveyor. The amount of the material can be adjusted at the material port with the movable sleeve of the adjustment sleeve. This machine is a fine material feeding equipment, is a kind of auxiliary machinery of transport aircraft, suitable for the shipment of light materials, the proportion of the heap is less than 2 of the material. Disc diameter: DN1500-DN1900
The disc feeder has a simple structure. The disc rotates to transfer the materials from the material port to the disc. The disc rotates to transfer the materials from the material port to the conveyor. The amount of the material can be adjusted at the material port with the movable sleeve of the adjustment sleeve. This machine is a fine material feeding equipment, is a kind of auxiliary machinery of transport aircraft, suitable for the shipment of light materials, the proportion of the heap is less than 2 of the material. Disc diameter: DN1500-DN1900
The humidifying mixer is composed of four parts: uniform feeding, blade feeding, mixing and beating humidification and vibration system, and is equipped with electric control and water supply system. The whole machine is fixed on a frame. The cylinder is supported by four groups of elastic elements. Through the excitation device, vibration is applied to make the whole machine rotate. The cylinder vibrates at high frequency, so that a certain gap is always maintained between the cylinder wall and the stirring shaft, and the running resistance of the whole machine is greatly reduced, completely put an end to the stuffy machine, blocking phenomenon, reduce downtime cleaning time, improve work efficiency.
Contact Information
+86 27-8970 8339
Address: No.5, Zhengjie, Shuangliu Street, Xinzhou District, Wuhan City, Hubei Province