Characteristics and scope of application of electric two-way valve
Classification:
Release Time：2018-01-22
Features of electric two-way valve: 1. Automatic magnetic clutch control device, which can produce stable torque under the condition of pause. 2, the use of gear and screw transmission, the center of the gear around the center of the plane rolling bearing support, the valve shaft is the use of the central screw sleeve screw mosquito connection. 3. High-strength ABS flame-retardant engineering plastic shell, waterproof and knock-resistant. 4. Auxiliary manual control lever can be attached to open the valve in case of emergency. 5. With valve position indicator, the valve opening can be clearly observed at the right time. The working principle of the electric two-way valve: the driver is composed
Electric two-way valve features:
1. The automatic magnetic clutch control device can produce stable torque in the case of pause.
2, the use of gear and screw transmission, the center of the gear around the center of the plane rolling bearing support, the valve shaft is the use of the central screw sleeve screw mosquito connection.
3. High-strength ABS flame-retardant engineering plastic shell, waterproof and knock-resistant.
4. Auxiliary manual control lever can be attached to open the valve in case of emergency.
5. With valve position indicator, the valve opening can be clearly observed at the right time.
electric two way valve working principle:
The drive is driven by a reversible synchronous motor and comes with a magnetic clutch. The motor can generate stable torque in the case of pause through the magnetic effect generated by the motor rotor and the clutch. Therefore, when there is no current through the motor, it can stably stop at any point, and when the valve is fully opened or fully closed, the magnetic clutch is separated and the adjustment is stopped. The floating or proportional control signal of the controller can make the motor rotate in time or reverse time.
technical parameters of electric two way valve:
1. Control mode: proportional control
2. Motor type: synchronous motor with magnetic clutch
3. Working voltage and power consumption 24VAC,50/60Hz6.5VA
4. Driving time 170S
5. Gear: stainless steel, brass, plastic
electric two way valve ambient temperature:
Operating:-5 to 55 ℃
Storage:-20 to 65 ℃ maximum relative humidity 92% without condensation
Related News
2026/02/28
Contact Information
+86 27-8970 8339
Address: No.5, Zhengjie, Shuangliu Street, Xinzhou District, Wuhan City, Hubei Province