The importance of proper installation of traps
Classification:
Release Time：2017-09-13
Trap installation is appropriate, the normal work of the trap and equipment production efficiency has a direct impact. The installation of the trap must be installed according to the formal requirements, in order to make the trap and equipment to achieve the best working condition. 1. Before installing the trap, be sure to purge the pipeline with pressurized steam to remove the debris in the pipeline. 2. The trap should be installed with a filter to ensure that the trap is not blocked by pipeline debris, and the filter should be cleaned regularly. 3. The valves shall be installed before and after the trap to facilitate the inspection and repair of the trap at any time. 4. Condensate flow direction shall be consistent with the arrow mark of trap installation. 5, the trap should be installed at the lowest point of the equipment outlet, and
TrapInstallation is appropriate, the normal work of the trap and equipment production efficiency has a direct impact. The installation of the trap must be installed according to the formal requirements, in order to make the trap and equipment to achieve the best working condition.
1. Before installing the trap, be sure to purge the pipeline with pressurized steam to remove the debris in the pipeline.
2. The trap should be installed with a filter to ensure that the trap is not blocked by pipeline debris, and the filter should be cleaned regularly.
3. The valves shall be installed before and after the trap to facilitate the inspection and repair of the trap at any time.
4. Condensate flow direction shall be consistent with the arrow mark of trap installation.
5, the trap should be installed at the lowest point of the equipment outlet, timely discharge of condensate, to avoid the pipeline steam resistance.
6. If there is no trap installed at the lowest position of the equipment, a condensate lifting joint should be added at the lowest position of the outlet to lift the condensate level and then install the trap to avoid steam resistance.
7. The outlet pipe of the trap should not be immersed in water. If immersed in water, a hole should be drilled at the bend to break the vacuum and prevent the sand from sucking back.
Related News
2026/02/28
Contact Information
+86 27-8970 8339
Address: No.5, Zhengjie, Shuangliu Street, Xinzhou District, Wuhan City, Hubei Province