Scraper Conveyor: What are the reasons for the chain interruption of scraper conveyor operation?
Classification:
Release Time：2021-03-16
What are the reasons for the interruption of the scraper conveyor chain? The reason for chain interruption during the operation of scraper conveyor system must be answered by our professional personnel. In fact, the continuous chain interruption during the operation of scraper conveyor is mostly due to coal in the upper chain, while the lower chain is not easy to detect. Only relying on empirical analysis and judgment, the chain suddenly droops and accumulates during the operation of single-chain scraper conveyor, or the side of the scraper begins to skew during the operation of the double chain scraper conveyor, indicating that the chain is broken.
scraper conveyorWhat are the reasons for running an interrupt chain? The reason for chain interruption during the operation of scraper conveyor system must be answered by our professional personnel. In fact, the continuous chain interruption during the operation of scraper conveyor is mostly due to coal in the upper chain, while the lower chain is not easy to detect. Only relying on empirical analysis and judgment, the chain suddenly droops and accumulates during the operation of single-chain scraper conveyor, or the side of the scraper begins to skew during the operation of the double chain scraper conveyor, indicating that the chain is broken.
Analysis of the reasons for the broken chain of the scraper conveyor: excessive load, overload operation, uneven working surface, resulting in the scraping plate, especially the bending of the working surface, the double chain outer chain load is large, easy to break, the chain strength is due to the middle groove and The long-term friction between the sprockets is reduced, and the chain strength is weakened by the influence of dynamic load.
Preventive measures for the broken chain of the scraper conveyor: the power supply mediates the scraper chain before the equipment is turned on, and the looseness is moderate: ensure that the head and the next scraping conveyor are connected at a height of more than 30mm to avoid the empty chain returning to coal. Clean up the head and tail debris or coal dust in time; deformed chutes and excessively worn chains cannot be used and need to be replaced immediately.
Scraper conveyor broken chain response measures: once the chain is broken, first stop, find the location of the chain break, reasons, etc., quickly deal with the solution.
The above is for you to introducescraper conveyorThe reason for the interruption of the chain, I hope it helps you!
Previous Page
Next Page
Related News
2026/02/28
Contact Information
+86 27-8970 8339
Address: No.5, Zhengjie, Shuangliu Street, Xinzhou District, Wuhan City, Hubei Province